TRIREXSC4-3022PN1是韩国三养（Samyag）TRIREX品牌下的聚碳酸酯/硅氧烷共聚物（PC/SiloxaeRei），该牌号将硅氧烷链段引入聚碳酸酯分子结构中，兼具PC的高透明、高强度的特性与硅氧烷的低温韧性和阻燃性，通过UL94V-0（1.5mm）和5VA（3.0mm）阻燃认证，并具备耐化学性和耐冲击性，适用于医疗器械领域。品牌：韩国三养S......
15366296797
TRIREX SC4-3022PN1是韩国三养（Samyang）TRIREX 品牌下的聚碳酸酯/硅氧烷共聚物（PC/Siloxane Resin），该牌号将硅氧烷链段引入聚碳酸酯分子结构中，兼具PC的高透明、高强度的特性与硅氧烷的低温韧性和阻燃性，通过UL94 V-0（1.5mm）和5VA（3.0mm）阻燃认证，并具备耐化学性和耐冲击性，适用于医疗器械领域。
品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：SC4-3022PN1
材料特性：医疗级PC/Siloxane Resin，阻燃、耐化学性、耐冲击性
应用领域 ：医疗器械外壳、医疗结构件、电子电器外壳、薄壁阻燃部件等
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® SC4-3022PN1的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRIREX SC4-3022PN1 GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | ASTM D792 | 1.2 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | ASTM D1238 | 10 |
| MECHANICAL | |||
| Tensile Strength@Max Load | kgf/cm² | ASTM D638 | 500 |
| Tensile Elongation @Break | % | ASTM D638 | 150 |
| Flexural Strength @Yield | kgf/cm² | ASTM D790 | 700 |
| Flexural Modulus | kgf/cm² | ASTM D790 | 18,500 |
| Izod Impact Strength(Notched 1/8”, R/T) | kgf.cm/cm | ASTM D256 | 65 |
| Rockwell Hardness(R Scale) | - | ASTM D785 | 120 |
| THERMAL | |||
| HDT（18.6 kgf/cm²） | ℃ | ASTM D648 | 105 |
| OTHERS | |||
| UL-94 Flammability (1.5t) | - | UL 94 | V-0 / 5VB |
| UL-94 Flammability (3.0t) | - | UL 94 | V-0 / 5VA |
| Mold Shrinkage (3t) | % | ASTM D955 | 0.4~0.6 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRIREX SC4-3022PN1 GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 90~100 |
| Drying Time | hr | 3~5 |
| Moisture Content, Max | % | 0.02 |
| Melt Temperature | ℃ | 290~310 |
| Nozzle Temperature | ℃ | 290~310 |
| Front Temperature | ℃ | 290~310 |
| Middle Temperature | ℃ | 280~300 |
| Rear Temperature | ℃ | 270~290 |
| Mold Temperature | ℃ | 80~100 |
| Injection Pressure | MPa | 70~140 |
| Injection Speed | % | 50~80 |
| Back Pressure | MPa | 0.3~0.7 |
| Screw Speed | rpm | 40~70 |
|
• General processing conditions for TRIREX SC4-3022PN1 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance. |
||
苏州善德宸信 — 专业塑胶材料方案集成服务商 ，可为客户提供原厂工程塑料随货资料：物性表（TDS）、安全数据表（SDS/MSDS）、出厂检验报告（COA）、RoHS报告、REACH报告、UL黄卡 等，同时提供材料供应、技术咨询及应用开发支持。如您未找到相关材料的物性表，欢迎直接来电咨询，我们竭诚为您服务。
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
