TRIREX3025PG20是韩国三养（Samyag）TRIREX品牌下的玻纤增强阻燃聚碳酸酯（PC）牌号，20%玻璃纤维，阻燃，1.5mm壁厚即达UL94V-0等级。其弯曲模量达56,500kgf/cm²（约5.5GPa），拉伸强度960kgf/cm²，HDT为125℃，成型收缩率仅0.2%~0.4%，刚性与耐热能力明显优于通用PC，适合替代部分金属件或普通阻燃塑料用于电气电......
15366296797
TRIREX 3025PG20是韩国三养（Samyang）TRIREX 品牌下的玻纤增强阻燃聚碳酸酯（PC）牌号，20%玻璃纤维，阻燃，1.5mm壁厚即达UL94 V-0等级。其弯曲模量达56,500 kgf/cm²（约5.5GPa），拉伸强度960kgf/cm²，HDT为125℃，成型收缩率仅0.2%~0.4%，刚性与耐热能力明显优于通用 PC，适合替代部分金属件或普通阻燃塑料用于电气电子、家电、办公设备、汽车电气及 LED 照明等领域的结构件与阻燃部件。
品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：3025PG20
材料特性：20%玻纤增强，阻燃，
应用领域 ：用于电气电子、家电、办公设备、汽车电气及 LED 照明等领域的结构件与阻燃部件
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3025PG20的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRILOY 3025PG20 GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.34 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.12 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | D1238 | 7 |
| MECHANICAL | |||
| Tensile Strength at yield | kgf/cm² | D638 | 960 |
| Tensile Elongation at break | % | D638 | 3 |
| Flexural Strength at yield | kgf/cm² | D790 | 1550 |
| Flexural Modulus | kgf/cm² | D790 | 56,500 |
| Izod Impact Strength,notched, 23℃ (1/8”) | kgf.cm/cm | D256 | 10 |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 125 |
| OTHERS | |||
| UL-94 Flammability | - | (UL 94) | V-0@1.5mm |
| Mold Shrinkage | % | D955 | 0.2~0.4 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRILOY 3025PG20 GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 110~120 |
| Drying Time | hr | 3~5 |
| Moisture Content, Max | % | 0.02 |
| Melt Temperature | ℃ | 280~310 |
| Nozzle Temperature | ℃ | 270~310 |
| Front Temperature | ℃ | 280~310 |
| Middle Temperature | ℃ | 270~300 |
| Rear Temperature | ℃ | 260~290 |
| Mold Temperature | ℃ | 60~90 |
| Back Pressure | MPa | 0.4~0.6 |
| Screw Speed | % | 40~70(slow to moerate) |
| Vent Depth | mm | 0.02~0.08 |
|
• General processing conditions for TRILOY 3025PG20 are shown below.
• Drying prior to processing is essential to ensure desired appearance and property performance.
|
||
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
