TRIREX3025G20是韩国三养（Samyag）TRIREX品牌下的聚碳酸酯（PC）牌号，含有20%玻璃纤维增强填充。在拉伸强度、弯曲强度和弯曲模量方面有显著提升，同时热变形温度更高、成型收缩率更低，适合对结构强度、尺寸精度和耐热性要求更为苛刻的应用场景。品牌：韩国三养Samyag品名：TRIREX品类：PC牌号：3025G20材料特性：2......
15366296797
TRIREX 3025G20是韩国三养（Samyang）TRIREX 品牌下的聚碳酸酯（PC）牌号，含有20%玻璃纤维增强填充。在拉伸强度、弯曲强度和弯曲模量方面有显著提升，同时热变形温度更高、成型收缩率更低，适合对结构强度、尺寸精度和耐热性要求更为苛刻的应用场景。
品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：3025G20
材料特性：20%玻纤、高强度、高刚性、阻燃V0、低收缩率、耐热性好
应用领域 ：电子电器、汽车工业、家用电器、通讯设备、工业结构件等
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3025G20的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRIREX 3025G20 GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.34 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.12 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | D1238 | 8 |
| MECHANICAL | |||
| Tensile Strength at yield | kgf/cm² | D638 | 1000 |
| Tensile Elongation at break | % | D638 | 3 |
| Flexural Strength at yield | kgf/cm² | D790 | 1500 |
| Flexural Modulus | kgf/cm² | D790 | 48,000 |
| Izod Impact Strength, notched, 23℃(1/8") | kgf.cm/cm | D256 | 12 |
| Rockwell Hardness | R scale | D785 | 121 |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 145 |
| OTHERS | |||
| UL-94 Flammability (1.5mm thickness) | - | (UL 94) | V-0 |
| Mold Shrinkage (3mm thickness) | % | D955 | 0.1~0.3 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRIREX 3025G20 GRADE| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 120 |
| Drying Time | hr | 3~4 |
| Moisture Content, Max | % | 0.02 |
| Melt Temperature | ℃ | 290~320 |
| Nozzle Temperature | ℃ | 300~320 |
| Front Temperature | ℃ | 300~320 |
| Middle Temperature | ℃ | 290~310 |
| Rear Temperature | ℃ | 280~300 |
| Mold Temperature | ℃ | 80~110 |
| Back Pressure | MPa | 0.3~0.7 |
| Screw Speed | Rpm | 40~70 |
| Vent Depth | mm | 0.025~0.076 |
|
• General processing conditions for TRIREX 3025G20 are shown below.
• Drying prior to processing is essential to ensure desired appearance and property performance.
|
||
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
