15366296797
TRIREX 3025G15是韩国三养（Samyang）TRIREX 品牌下的聚碳酸酯（PC）牌号，含有15%玻璃纤维增强填充。玻璃纤维的加入显著提升了材料的拉伸强度、弯曲强度和弯曲模量，同时提高了热变形温度并降低了成型收缩率，使其非常适合对结构强度和尺寸精度有较高要求的应用场景。
品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：3025G15
材料特性：15%玻纤、高强度、高刚性、阻燃V0、低收缩率、耐热性好
应用领域 ：电子电器、汽车工业、家用电器、通讯设备、工业结构件
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3025G15的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRIREX 3025G15 GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.3 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | D1238 | 18 |
| MECHANICAL | |||
| Tensile Strength @Max Load | kgf/cm² | D638 | 580 |
| Tensile Elongation @Break | % | D638 | 8 |
| Flexural Strength @Yield | kgf/cm² | D790 | 900 |
| Flexural Modulus | kgf/cm² | D790 | 35,000 |
| Izod Impact Strength（Notched 1/8"，R/T) | kgf.cm/cm | D256 | 10 |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 138 |
| OTHERS | |||
| UL-94 Flammability | - | (UL 94) | V-0@1.5mm |
| Mold Shrinkage | % | D955 | 0.3~0.5 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRIREX 3025G15 GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 120 |
| Drying Time | hr | 3~4 |
| Moisture Content, Max | % | - |
| Melt Temperature | ℃ | 310~320 |
| Nozzle Temperature | ℃ | 300~320 |
| Front Temperature | ℃ | 300~320 |
| Middle Temperature | ℃ | 290~315 |
| Rear Temperature | ℃ | 280~300 |
| Mold Temperature | ℃ | 80~110 |
| Injection Pressure | % | <70 |
| Injection Speed | % | <60 |
| Back Pressure | % | <60 |
| Screw Speed | % | <50 |
|
• General processing conditions for TRIREX 3025G15 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance. |
||
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
