TRIREX3025FD是韩国三养（Samyag）TRIREX品牌下的食品级聚碳酸酯（PC）树脂，该牌号以卓越的低温冲击强度为核心特点，工作温度范围覆盖-100℃~135℃，同时具备良好的流动性、尺寸稳定性和耐候性。适用于食品容器、医疗器械等对材料安全性和低温韧性有严格要求的领域，仅提供透明色。品牌：韩国三养Samyag品名：TRIREX......
15366296797
TRIREX 3025FD是韩国三养（Samyang）TRIREX 品牌下的食品级聚碳酸酯（PC）树脂，该牌号以卓越的低温冲击强度为核心特点，工作温度范围覆盖-100℃ ~ 135℃，同时具备良好的流动性、尺寸稳定性和耐候性。适用于食品容器、医疗器械等对材料安全性和低温韧性有严格要求的领域，仅提供透明色。
品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：3025FD
材料特性：食品级PC/、低温抗冲、透明色
应用领域 ：食品容器、医疗器械等对材料安全性和低温韧性有严格要求的领域
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3025FD的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRIREX 3025FD GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.2 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.15 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | D1238 | 10 |
| MECHANICAL | |||
| Tensile Strength at yield | kgf/cm² | D638 | 710 |
| Tensile Elongation at break | % | D638 | 120 |
| Flexural Strength at yield | kgf/cm² | D790 | 880 |
| Flexural Modulus | kgf/cm² | D790 | 21,000 |
| Izod Impact Strength, notched, 23℃(1/8") | kgf.cm/cm | D256 | 90 |
| Rockwell Hardness | R scale | D785 | |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 135 |
| Coefficient of Linear Thermal Expansion | ㎜/㎜/℃ | D696 | 5~7 x 10⁻⁵ |
| ELECTRICAL | |||
| Volume Resistivity | Ω∙㎝ | D257 | 4×10¹⁶ |
| Dielectric Strength | kV/㎜ | D149 | 30 |
| Dielectric Constant | - | D150 | |
| Dissipation Factor | - | D150 | |
| ARC Resistance | sec | D495 | 120 |
| OTHERS | |||
| UL-94 Flammability (1/16” thickness) | - | (UL 94) | V-2 |
| Mold Shrinkage (3mm thickness) | % | D955 | 0.5~0.7 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRIREX 3025FD GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 120 |
| Drying Time | hr | 3~5 |
| Moisture Content, Max | % | 0.02 |
| Melt Temperature | ℃ | 275~310 |
| Nozzle Temperature | ℃ | 275~310 |
| Front Temperature | ℃ | 275~300 |
| Middle Temperature | ℃ | 260~285 |
| Rear Temperature | ℃ | 245~270 |
| Mold Temperature | ℃ | 65~105 |
| Back Pressure | MPa | 0.25 ~ 0.7 |
| Screw Speed | rpm | 40~70 |
| Vent Depth | mm | 0.02 ~ 0.08 |
|
• General processing conditions for TRIREX 3025FD are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance. |
||
苏州善德宸信 — 专业塑胶材料方案集成服务商 ，可为客户提供原厂工程塑料随货资料：物性表（TDS）、安全数据表（SDS/MSDS）、出厂检验报告（COA）、RoHS报告、REACH报告、UL黄卡 等，同时提供材料供应、技术咨询及应用开发支持。如您未找到相关材料的物性表，欢迎直接来电咨询，我们竭诚为您服务。
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
