TRIREX3022UD是韩国三养（Samyag）TRIREX品牌下的聚碳酸酯（PC）牌号，密度1.25，熔融指数13g/10mi（300℃,1.2kg），约为常规PC的两倍，适合家电与消费电子薄壁外壳、结构复杂的电气绝缘件、一般灯具结构件及办公设备内部件。品牌：韩国三养Samyag品名：TRIREX品类：PC牌号：3022UD材料特性：高流动PC应用领域：适合......
15366296797
TRIREX 3022UD是韩国三养（Samyang）TRIREX 品牌下的聚碳酸酯（PC）牌号，密度1.25，熔融指数13g/10min（300℃, 1.2kg），约为常规 PC的两倍，适合家电与消费电子薄壁外壳、结构复杂的电气绝缘件、一般灯具结构件及办公设备内部件。
品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：3022UD
材料特性：高流动PC
应用领域 ：适合家电与消费电子薄壁外壳、结构复杂的电气绝缘件、一般灯具结构件及办公设备内部件
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3022UD的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRILOY 3022UD GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.25 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.35 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | D1238 | 13 |
| MECHANICAL | |||
| Tensile Strength @Max Load | kgf/cm² | D638 | 500 |
| Tensile Elongation @Break | % | D638 | 60 |
| Flexural Strength @Yield | kgf/cm² | D790 | 850 |
| Flexural Modulus | kgf/cm² | D790 | 21,000 |
| Izod Impact Strength(Notched 1/8”, R/T) | kgf.cm/cm | D256 | 65 |
| Rockwell Hardness | R scale | D785 | - |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 125 |
| OTHERS | |||
| UL-94 Flammability | - | (UL 94) | HB |
| Mold Shrinkage | % | D955 | 0.4~0.6 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRILOY 3022UD GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 110~120 |
| Drying Time | hr | 4~5 |
| Moisture Content, Max | % | - |
| Melt Temperature | ℃ | 290~310 |
| Nozzle Temperature | ℃ | 270~300 |
| Front Temperature | ℃ | 260~290 |
| Middle Temperature | ℃ | 250~280 |
| Rear Temperature | ℃ | 240~270 |
| Mold Temperature | ℃ | 60~120 |
| Injection Pressure | MPa | 90~150 |
| Injection Speed | % | 40~80 |
| Back Pressure | MPa | 0.4~0.6 |
| Screw Speed | rpm | 80~100 |
|
• General processing conditions for TRILOY 3022UD are shown below.
• Drying prior to processing is essential to ensure desired appearance and property performance.
|
||
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
