TRIREX3020FD是韩国三养（Samyag）TRIREX品牌下的食品级聚碳酸酯（PC）树脂，熔体流动速率23g/10mi（300℃/1.2kg）。具有优异的机械性能、良好的尺寸稳定性和高电气性能，可广泛应用于电气、电子、电器、汽车和光学行业。优异的低温抗冲击性，良好的流动性，工作温度范围覆盖-100℃~135℃，主要面向电气与电子应用和......
15366296797
TRIREX 3020FD是韩国三养（Samyang）TRIREX品牌下的食品级聚碳酸酯（PC）树脂，熔体流动速率23g/10min（300℃/1.2kg）。具有优异的机械性能、良好的尺寸稳定性和高电气性能，可广泛应用于电气、电子、电器、汽车和光学行业。优异的低温抗冲击性，良好的流动性，工作温度范围覆盖-100℃~135℃，主要面向电气与电子应用和食品接触材料两大方向，低粘度，仅提供透明色。
品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：3020FD
材料特性：食品级PC、低温抗冲、透明色
应用领域 ：电气与电子应用和食品接触材料
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3020FD的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRIREX 3020FD GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.2 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.15 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | D1238 | 23 |
| MECHANICAL | |||
| Tensile Strength at yield | kgf/cm² | D638 | 680 |
| Tensile Elongation at break | % | D638 | 130 |
| Flexural Strength at yield | kgf/cm² | D790 | 940 |
| Flexural Modulus | kgf/cm² | D790 | 23,000 |
| Izod Impact Strength, notched, 23℃(1/8") | kgf.cm/cm | D256 | 80 |
| Rockwell Hardness | R scale | D785 | |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 133 |
| Coefficient of Linear Thermal Expansion | ㎜/㎜/℃ | D696 | 5~7 x 10⁻⁵ |
| ELECTRICAL | |||
| Volume Resistivity | Ω∙㎝ | D257 | 4×10¹⁶ |
| Dielectric Strength | kV/㎜ | D149 | 30 |
| Dielectric Constant | - | D150 | |
| Dissipation Factor | - | D150 | |
| ARC Resistance | sec | D495 | 120 |
| OTHERS | |||
| UL-94 Flammability (1/16” thickness) | - | (UL 94) | V-2 |
| Mold Shrinkage (3mm thickness) | % | D955 | 0.5~0.7 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRIREX 3020FD GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 120 |
| Drying Time | hr | 3~5 |
| Moisture Content, Max | % | 0.02 |
| Melt Temperature | ℃ | 265~300 |
| Nozzle Temperature | ℃ | 265~300 |
| Front Temperature | ℃ | 265~290 |
| Middle Temperature | ℃ | 250~275 |
| Rear Temperature | ℃ | 235~260 |
| Mold Temperature | ℃ | 65~105 |
| Back Pressure | MPa | 0.25 ~ 0.7 |
| Screw Speed | rpm | 40~70 |
| Vent Depth | mm | 0.02 ~ 0.08 |
|
• General processing conditions for TRIREX 3020FD are shown below.
• Drying prior to processing is essential to ensure desired appearance and property performance.
|
||
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
