TRILOY270GNH10是韩国三养TRILOY品牌下的阻燃增强PC/ABS牌号，玻纤填充赋予其高刚性和尺寸精度（弯曲模量38,500kgf/cm²、成型收缩0.2–0.3%），UL94V-0认证满足电子电器阻燃合规需求。适合显示器外壳、充电器外壳、办公设备结构件等高刚性阻燃场景。品牌：韩国三养Samyag品名：TRILOY品类：PC/ABS牌号：270GNH10材料......
15366296797
TRILOY 270GNH10 是韩国三养TRILOY品牌下的阻燃增强PC/ABS牌号 ，玻纤填充赋予其高刚性和尺寸精度（弯曲模量 38,500 kgf/cm²、成型收缩 0.2–0.3%），UL94 V-0 认证满足电子电器阻燃合规需求。适合显示器外壳、充电器外壳、办公设备结构件等高刚性阻燃场景。
品牌：韩国三养Samyang
品名：TRILOY
品类：PC/ABS
牌号：270GNH10
材料特性：玻纤增强，阻燃
应用领域 ：显示器外壳、充电器外壳、办公设备结构件等高刚性阻燃场景
苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRILOY® 270GNH10的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。
TYPICAL DATA OF
TRILOY 270GNH10 GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.18 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.2 |
| Melt Flow Rate (260℃, 5.0kg) | g/10min | D1238 | 28 |
| MECHANICAL | |||
| Tensile Strength at yield | kgf/cm² | D638 | 730 |
| Tensile Elongation at break | % | D638 | 3 |
| Flexural Strength at yield | kgf/cm² | D790 | 1150 |
| Flexural Modulus | kgf/cm² | D790 | 38,500 |
| Izod Impact Strength, notched, 23℃(1/8") | kgf.cm/cm | D256 | 8 |
| Rockwell Hardness | M scale | D785 | 121 |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 90 |
| OTHERS | |||
| UL-94 Flammability | - | (UL 94) | V-0 |
| Mold Shrinkage | % | D955 | 0.2~0.3 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition. | |||
TRILOY 270GNH10 GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 85~90 |
| Drying Time | hr | 3~4 |
| Moisture Content, Max | % | 0.02 |
| Melt Temperature | ℃ | 260~280 |
| Nozzle Temperature | ℃ | 250~270 |
| Front Temperature | ℃ | 240~260 |
| Middle Temperature | ℃ | 240~260 |
| Rear Temperature | ℃ | 230~250 |
| Mold Temperature | ℃ | 80~100 |
| Back Pressure | MPa | 0.3~0.7 |
| Screw Speed | % | 30~60(slow to moerate) |
| Vent Depth | Mm | 0.02~0.08 |
|
• General processing conditions for TRILOY 270GNH10 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance. |
||
苏州善德宸信 — 专业塑胶材料方案集成服务商 ，可为客户提供原厂工程塑料随货资料：物性表（TDS）、安全数据表（SDS/MSDS）、出厂检验报告（COA）、RoHS报告、REACH报告、UL黄卡 等，同时提供材料供应、技术咨询及应用开发支持。如您未找到相关材料的物性表，欢迎直接来电咨询，我们竭诚为您服务。
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
