TRIBIT1500G30是韩国三养SamyagPBT系列中的玻纤增强级牌号，因其优异的耐化学性、电绝缘性能和快速结晶特性，广泛应用于汽车电子、连接器和精密部件。苏州善德宸信作为韩国三养工程塑料的授权代理商，可为客户提供TRIBIT1500G30的物性表、材料供应、技术咨询及应用开发支持。品牌：韩国三养Samyag品名：TRIBIT品类：P......
15366296797
TRIBIT 1500G30是韩国三养Samyang PBT系列中的玻纤增强级牌号，因其优异的耐化学性、电绝缘性能和快速结晶特性，广泛应用于汽车电子、连接器和精密部件。苏州善德宸信作为韩国三养工程塑料的授权代理商，可为客户提供TRIBIT 1500G30的物性表、材料供应、技术咨询及应用开发支持。
品牌：韩国三养Samyang
品名：TRIBIT
品类：PBT
牌号：1500G30
材料特性：30%玻纤增强、耐化学性、电绝缘性能
应用领域：家电、汽车和电子电器
TYPICAL DATA OF
TRIBIT 1500G30 GRADE
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
| PHYSICAL | |||
| Specific Gravity | - | D792 | 1.52 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.07 |
| Melt Flow Rate (260℃, 5.0kg) | g/10min | D1238 | 48 |
| MECHANICAL | |||
| Tensile Strength | kgf/cm² | D638 | 1200 |
| Tensile Elongation at break | % | D638 | 3 |
| Flexural Strength at Yield | kgf/cm² | D790 | 1800 |
| Flexural Modulus | kgf/cm² | D790 | 75,000 |
| Izod Impact Strength, notched, 23℃(1/8") | kgf.cm/cm | D256 | 8 |
| Rockwell Hardness | R scale | D785 | 120 |
| THERMAL | |||
| HDT, 18.6 kgf/cm² | ℃ | D648 | 210 |
| Coefficient of Linear Thermal Expansion | ㎜/㎜/℃ | D696 | 3 x 10⁻⁵ |
| ELECTRICAL | |||
| Volume Resistivity | Ω∙㎝ | D257 | 1×10¹⁶ |
| Dielectric Strength | kV/㎜ | D149 | 25 |
| Dielectric Constant | - | D150 | 3.2 |
| Dissipation Factor | - | D150 | 0.02 |
| ARC Resistance | sec | D495 | 130 |
| OTHERS | |||
| UL-94 Flammability (0.84mm thickness) | - | (UL 94) | HB |
| Mold Shrinkage | % | D955 | 0.2~0.12 |
| ※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition. | |||
PROCESSING GUIDE FOR
TRIBIT 1500G30 GRADE
| SPECIFICATION | UNIT | CONDITIONS |
| Drying Temperature | ℃ | 120 |
| Drying Time | hr | 3~5 |
| Moisture Content, Max | % | 0.02 |
| Melt Temperature | ℃ | 250~270 |
| Nozzle Temperature | ℃ | 250~270 |
| Front Temperature | ℃ | 250~270 |
| Middle Temperature | ℃ | 245~265 |
| Rear Temperature | ℃ | 240~260 |
| Mold Temperature | ℃ | 60~90 |
| Back Pressure | % | < 70 |
| Screw Speed | % | < 60 |
| Injection Pressure | % | < 70 |
| Injection Speed | % | < 50 |
| Hold Pressure | % | < 50 |
| Injection Cushion | Mm | 3 ~ 6 |
|
• General processing conditions for TRIBIT 1500G30 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance. |
||
热线：15366296797
传真：0512-68032628
QQ：648948216
联系邮箱：abel.liu@e-sdcx.com
地址:苏州工业园区澄湾路19号 中新科技大厦16楼
