EMR210NH 韩国三养Samyang PC/ABS TRILOY

产品简介 / Introduction

EMR210NH 是韩国三养社 TRILOY 210NH 系列无卤阻燃 PC/ABS 合金塑料颗粒，由苏州善德宸信贸易有限公司代理经销。该材料以聚碳酸酯（PC）和丙烯腈-丁二烯-苯乙烯共聚物（ABS）为基体，通过无卤阻燃改性，兼具优异的阻燃性能、高抗冲击性和良好的加工流动性，广泛应用于消费电子、汽车零部件、家用电器和办公设备等领域。

品牌：韩国三养Samyang
品名：TRILOY
品类：PC/ABS
牌号：EMR210NH
材料特性：无卤V0阻燃、高抗冲
应用领域：消费电子、汽车、家电、工业设备

TYPICAL DATA OF
TRILOY EMR210NH GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.18
Melt Flow Rate (260℃, 2.16kg)	g/10min	D1238	20

MECHANICAL
Tensile Strength @Max Load	kgf/cm²	D638	560
Tensile Elongation @Break	%	D638	80
Flexural Strength @Yield	kgf/cm²	D790	920
Flexural Modulus	kgf/cm²	D790	23,000
Izod Impact Strength（Notched 1/8"，R/T)	kgf.cm/cm	D256	65

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	84

OTHERS
UL-94 Flammability	-	(UL 94)	V-0@1.5mm
Mold Shrinkage	%	D955	0.5~0.7
※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRILOY EMR210NH GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	80~85
Drying Time	hr	3~5
Moisture Content, Max	%	-

Melt Temperature	℃	240~270
Nozzle Temperature	℃	240~270
Front Temperature	℃	240~270
Middle Temperature	℃	230~260
Rear Temperature	℃	230~260
Mold Temperature	℃	50~80

Injection Pressure	MPa	90~150
Injection Speed	%	40~80
Back Pressure	MPa	0.4~0.6
Screw Speed	Rpm	80~100
• General processing conditions for TRILOY EMR210NH are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.