SC4-3022PN1韩国三养Samyang PC TRIREX

产品简介 / Introduction

TRIREX SC4-3022PN1是韩国三养（Samyang）TRIREX 品牌下的聚碳酸酯/硅氧烷共聚物（PC/Siloxane Resin），该牌号将硅氧烷链段引入聚碳酸酯分子结构中，兼具PC的高透明、高强度的特性与硅氧烷的低温韧性和阻燃性，通过UL94 V-0（1.5mm）和5VA（3.0mm）阻燃认证，并具备耐化学性和耐冲击性，适用于医疗器械领域。

  品牌：韩国三养Samyang
  品名：TRIREX
  品类：PC
  牌号：SC4-3022PN1
  材料特性：医疗级PC/Siloxane Resin，阻燃、耐化学性、耐冲击性
  应用领域：医疗器械外壳、医疗结构件、电子电器外壳、薄壁阻燃部件等

苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® SC4-3022PN1的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。

TYPICAL DATA OF
TRIREX SC4-3022PN1 GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	ASTM D792	1.2
Melt Flow Rate (300℃, 1.2kg)	g/10min	ASTM D1238	10

MECHANICAL
Tensile Strength@Max Load	kgf/cm²	ASTM D638	500
Tensile Elongation @Break	%	ASTM D638	150
Flexural Strength @Yield	kgf/cm²	ASTM D790	700
Flexural Modulus	kgf/cm²	ASTM D790	18,500
Izod Impact Strength(Notched 1/8”, R/T)	kgf.cm/cm	ASTM D256	65
Rockwell Hardness(R Scale)	-	ASTM D785	120

THERMAL
HDT（18.6 kgf/cm²）	℃	ASTM D648	105

OTHERS
UL-94 Flammability (1.5t)	-	UL 94	V-0 / 5VB
UL-94 Flammability (3.0t)	-	UL 94	V-0 / 5VA
Mold Shrinkage (3t)	%	ASTM D955	0.4~0.6
※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRIREX SC4-3022PN1 GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	90~100
Drying Time	hr	3~5
Moisture Content, Max	%	0.02

Melt Temperature	℃	290~310
Nozzle Temperature	℃	290~310
Front Temperature	℃	290~310
Middle Temperature	℃	280~300
Rear Temperature	℃	270~290
Mold Temperature	℃	80~100

Injection Pressure	MPa	70~140
Injection Speed	%	50~80
Back Pressure	MPa	0.3~0.7
Screw Speed	rpm	40~70
• General processing conditions for TRIREX SC4-3022PN1 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.

苏州善德宸信 — 专业塑胶材料方案集成服务商，可为客户提供原厂工程塑料随货资料：物性表（TDS）、安全数据表（SDS/MSDS）、出厂检验报告（COA）、RoHS报告、REACH报告、UL黄卡 等，同时提供材料供应、技术咨询及应用开发支持。如您未找到相关材料的物性表，欢迎直接来电咨询，我们竭诚为您服务。

联系电话：15366296797 | 邮箱： abel.liu@e-sdcx.com