3027IR 韩国三养Samyang PC TRIREX

产品简介 / Introduction

TRIREX 3027IR是韩国三养（Samyang）TRIREX 品牌下的透明聚碳酸酯（PC）牌号，阻燃为UL94 V-2（0.5mm厚度），热变形温度136℃（18.6kgf/cm²载荷），覆盖多数电气与照明部件的耐温需求，体积电阻率4×10¹⁶ Ω·cm、介电强度30kV/mm 的绝缘表现也较为稳定。该牌号保持 PC 固有的透明外观，适合透明防护件、灯罩、电器视窗与绝缘结构件等场景。

  品牌：韩国三养Samyang
  品名：TRIREX
  品类：PC
  牌号：3027IR
  材料特性：透明PC
  应用领域：透明防护件、灯罩、电器视窗与绝缘结构件等场景

苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3027IR的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。

TYPICAL DATA OF
TRILOY 3027IR GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.2
Water Absorption (24 hours at 23℃)	%	D570	0.15
Melt Flow Rate (300℃, 1.2kg)	g/10min	D1238	6

MECHANICAL
Tensile Strength at yield	kgf/cm²	D638	700
Tensile Elongation at break	%	D638	130
Flexural Strength at yield	kgf/cm²	D790	900
Flexural Modulus	kgf/cm²	D790	22,000
Izod Impact Strength,notched, 23℃ (1/8”)	kgf.cm/cm	D256	85
Rockwell Hardness	R scale	D785	120

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	136
Coefficient of Linear Thermal Expansion	㎜/㎜/℃	D696	5~7×10⁻⁵

OTHERS
UL-94 Flammability	-	(UL 94)	V-2
Mold Shrinkage	%	D955	0.5~0.7
※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRILOY 3027IR GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	120
Drying Time	hr	3~4
Moisture Content, Max	%	0.02

Melt Temperature	℃	290~310
Nozzle Temperature	℃	280~315
Front Temperature	℃	290~315
Middle Temperature	℃	275~300
Rear Temperature	℃	260~280
Mold Temperature	℃	65~105

Back Pressure	MPa	0.3~0.7
Screw Speed	rpm	40~70(slow to moerate)
Vent Depth	mm	0.02~0.08
• General processing conditions for TRILOY 3027IR are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.