3025PG20韩国三养Samyang PC TRIREX

产品简介 / Introduction

TRIREX 3025PG20是韩国三养（Samyang）TRIREX 品牌下的玻纤增强阻燃聚碳酸酯（PC）牌号，20%玻璃纤维，阻燃，1.5mm壁厚即达UL94 V-0等级。其弯曲模量达56,500 kgf/cm²（约5.5GPa），拉伸强度960kgf/cm²，HDT为125℃，成型收缩率仅0.2%~0.4%，刚性与耐热能力明显优于通用 PC，适合替代部分金属件或普通阻燃塑料用于电气电子、家电、办公设备、汽车电气及 LED 照明等领域的结构件与阻燃部件。

  品牌：韩国三养Samyang
  品名：TRIREX
  品类：PC
  牌号：3025PG20
  材料特性：20%玻纤增强，阻燃，
  应用领域：用于电气电子、家电、办公设备、汽车电气及 LED 照明等领域的结构件与阻燃部件

苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3025PG20的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。

TYPICAL DATA OF
TRILOY 3025PG20 GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.34
Water Absorption (24 hours at 23℃)	%	D570	0.12
Melt Flow Rate (300℃, 1.2kg)	g/10min	D1238	7

MECHANICAL
Tensile Strength at yield	kgf/cm²	D638	960
Tensile Elongation at break	%	D638	3
Flexural Strength at yield	kgf/cm²	D790	1550
Flexural Modulus	kgf/cm²	D790	56,500
Izod Impact Strength,notched, 23℃ (1/8”)	kgf.cm/cm	D256	10

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	125

OTHERS
UL-94 Flammability	-	(UL 94)	V-0@1.5mm
Mold Shrinkage	%	D955	0.2~0.4
※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRILOY 3025PG20 GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	110~120
Drying Time	hr	3~5
Moisture Content, Max	%	0.02

Melt Temperature	℃	280~310
Nozzle Temperature	℃	270~310
Front Temperature	℃	280~310
Middle Temperature	℃	270~300
Rear Temperature	℃	260~290
Mold Temperature	℃	60~90

Back Pressure	MPa	0.4~0.6
Screw Speed	%	40~70(slow to moerate)
Vent Depth	mm	0.02~0.08
• General processing conditions for TRILOY 3025PG20 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.