3025G15韩国三养Samyang PC TRIREX

产品简介 / Introduction

TRIREX 3025G15是韩国三养（Samyang）TRIREX 品牌下的聚碳酸酯（PC）牌号，含有15%玻璃纤维增强填充。玻璃纤维的加入显著提升了材料的拉伸强度、弯曲强度和弯曲模量，同时提高了热变形温度并降低了成型收缩率，使其非常适合对结构强度和尺寸精度有较高要求的应用场景。

  品牌：韩国三养Samyang
  品名：TRIREX
  品类：PC
  牌号：3025G15
  材料特性：15%玻纤、高强度、高刚性、阻燃V0、低收缩率、耐热性好
  应用领域：电子电器、汽车工业、家用电器、通讯设备、工业结构件

苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3025G15的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。

TYPICAL DATA OF
TRIREX 3025G15 GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.3
Melt Flow Rate (300℃, 1.2kg)	g/10min	D1238	18

MECHANICAL
Tensile Strength @Max Load	kgf/cm²	D638	580
Tensile Elongation @Break	%	D638	8
Flexural Strength @Yield	kgf/cm²	D790	900
Flexural Modulus	kgf/cm²	D790	35,000
Izod Impact Strength（Notched 1/8"，R/T)	kgf.cm/cm	D256	10

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	138

OTHERS
UL-94 Flammability	-	(UL 94)	V-0@1.5mm
Mold Shrinkage	%	D955	0.3~0.5
※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRIREX 3025G15 GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	120
Drying Time	hr	3~4
Moisture Content, Max	%	-

Melt Temperature	℃	310~320
Nozzle Temperature	℃	300~320
Front Temperature	℃	300~320
Middle Temperature	℃	290~315
Rear Temperature	℃	280~300
Mold Temperature	℃	80~110

Injection Pressure	%	<70
Injection Speed	%	<60
Back Pressure	%	<60
Screw Speed	%	<50
• General processing conditions for TRIREX 3025G15 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.