3022UD 韩国三养Samyang PC TRIREX

产品简介 / Introduction

TRIREX 3022UD是韩国三养（Samyang）TRIREX 品牌下的聚碳酸酯（PC）牌号，密度1.25，熔融指数13g/10min（300℃, 1.2kg），约为常规 PC的两倍，适合家电与消费电子薄壁外壳、结构复杂的电气绝缘件、一般灯具结构件及办公设备内部件。

  品牌：韩国三养Samyang
  品名：TRIREX
  品类：PC
  牌号：3022UD
  材料特性：高流动PC
  应用领域：适合家电与消费电子薄壁外壳、结构复杂的电气绝缘件、一般灯具结构件及办公设备内部件

苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3022UD的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。

TYPICAL DATA OF
TRILOY 3022UD GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.25
Water Absorption (24 hours at 23℃)	%	D570	0.35
Melt Flow Rate (300℃, 1.2kg)	g/10min	D1238	13

MECHANICAL
Tensile Strength @Max Load	kgf/cm²	D638	500
Tensile Elongation @Break	%	D638	60
Flexural Strength @Yield	kgf/cm²	D790	850
Flexural Modulus	kgf/cm²	D790	21,000
Izod Impact Strength(Notched 1/8”, R/T)	kgf.cm/cm	D256	65
Rockwell Hardness	R scale	D785	-

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	125

OTHERS
UL-94 Flammability	-	(UL 94)	HB
Mold Shrinkage	%	D955	0.4~0.6
※ The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRILOY 3022UD GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	110~120
Drying Time	hr	4~5
Moisture Content, Max	%	-

Melt Temperature	℃	290~310
Nozzle Temperature	℃	270~300
Front Temperature	℃	260~290
Middle Temperature	℃	250~280
Rear Temperature	℃	240~270
Mold Temperature	℃	60~120

Injection Pressure	MPa	90~150
Injection Speed	%	40~80
Back Pressure	MPa	0.4~0.6
Screw Speed	rpm	80~100
• General processing conditions for TRILOY 3022UD are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.