3022MD韩国三养Samyang PC TRIREX

产品简介 / Introduction

TRIREX 3022MD是韩国三养（Samyang）TRIREX 品牌下的医疗级聚碳酸酯（PC）牌号，该牌号通过 ISO 10993-1（生物相容性认证），Food（食品级FDA）， USP Class VI（美国药典第 VI 级塑料认证），Anti-Radiation（耐辐射灭菌能力），3022MD的熔体流动速率（MFR）为 14.0 g/10min，是流动性与机械性能均衡性最优的型号。其弯曲模量达 23,000 kgf/cm²，同时保持 90 kgf·cm/cm 的 Izod 缺口冲击强度，非常适合既要兼顾薄壁成型又要保证抗冲击性能的医疗器械部件。

品牌：韩国三养Samyang
品名：TRIREX
品类：PC
牌号：3022MD
材料特性：通过ISO 10993 + Food + USP Class VI + Anti-Radiation
应用领域：医疗器械部件

苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRIREX® 3022MD的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。

PROPERTY		UNIT	ASTM METHOD	3022MD
Specific Gravity		-	D792	1.2
Melt Flow Rate (300℃, 1.2kg)		g/10min	D1238	14
Tensile Strength at yield		kgf/cm²	D638	640
Tensile Elongation at break		%	D638	90
Flexural Strength		kgf/cm²	D790	920
Flexural Modulus		kgf/cm²	D790	21,000
Izod Impact, notched, 23℃(1/8")		kgf.cm/cm	D256	80
HDT, 18.6 kgf/cm²		℃	D648	125
Transmittance (Gamma ray 5oKGy) At 3mm	Non-Exposure	%	D1003	89
	After Exposure			87
Haze (Gamma ray 5oKGy) At 3mm	Non-Exposure	%	D1003	0.85
	After Exposure			0.85
Transmittance (E-Beam 50KGy)At 3mm	Non-Exposure	%	D1003	89
	After Exposure			86.5
Haze (E-Beam 50KGy)At 3mm	Non-Exposure	%	D1003	0.85
	After Exposure			0.85
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.