225韩国三养Samyang PC/ABS TRILOY

产品简介 / Introduction

TRILOY 225是韩国三养Samyang PC/ABS 系列中的通用级牌号，以抗冲击、耐热、尺寸稳定三大核心特性著称。其设计目标是为注塑制造商提供一款兼具优异力学性能和良好成型窗口的 PC/ABS 标准牌号，特别适用于对材料综合性能要求均衡的应用场景，在空调出风口格栅、汽车内饰面板、电子设备外壳等领域展现了可靠的使用表现。苏州善德宸信作为韩国三养工程塑料的授权代理商，可为客户提供TRILOY 225的物性表、材料供应、技术咨询及应用开发支持。

  品牌：韩国三养Samyang
  品名：TRILOY
  品类：PC/ABS
  牌号：225
  材料特性：抗冲击、耐热、尺寸稳定
  应用领域：汽车内饰件、电子电器外壳、家电面板

TYPICAL DATA OF
TRILOY 225 GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.15
Water Absorption (24 hours at 23℃)	%	D570	0.2
Melt Flow Rate (260℃, 5.0kg)	g/10min	D1238	17

MECHANICAL
Tensile Strength @Max Load	kgf/cm²	D638	590
Tensile Elongation @Break	%	D638	100
Flexural Strength @Yield	kgf/cm²	D790	950
Flexural Modulus	kgf/cm²	D790	24,000
Izod Impact Strength（Notched 1/8"，R/T)	kgf.cm/cm	D256	68

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	112

OTHERS
UL-94 Flammability	-	(UL 94)	HB
Mold Shrinkage	%	D955	0.5~0.7
※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRILOY 225 GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	100~110
Drying Time	hr	3~5
Moisture Content, Max	%	-

Melt Temperature	℃	260~280
Nozzle Temperature	℃	250~270
Front Temperature	℃	255~275
Middle Temperature	℃	250~275
Rear Temperature	℃	245~265
Mold Temperature	℃	60~90

Injection Pressure	MPa	90~150
Injection Speed	%	40~80
Back Pressure	MPa	0.4~0.6
Screw Speed	Rpm	80~100
• General processing conditions for TRILOY 225 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.