220HF韩国三养Samyang PC/ABS TRILOY

产品简介 / Introduction

TRILOY 220HF是韩国三养（Samyang）TRILOY品牌下的PC/ABS牌号，作为一款专为薄壁注塑和大表面积精密部件设计的PC/ABS合金材料，凭借 22g/10min的超高流动性、120%的断裂伸长率、108℃的HDT三大核心优势，在3C消费电子外壳、家电薄壁面板和精密结构件领域展现了显著的技术表现。

  品牌：韩国三养Samyang
  品名：TRILOY
  品类：PC/ABS
  牌号：220HF
  材料特性：超高流动性、韧性出色、耐热与刚性的平衡、低密度、低吸水率
  应用领域：3C消费电子外壳、家电薄壁面板和精密结构件等

苏州善德宸信作为韩国三养Samyang的授权代理商，可为您提供TRILOY® 220HF的物性表、材料供应、技术咨询及应用开发支持。欢迎随时致电15366296797，邮件请至abel.liu@e-sdcx.com。

TYPICAL DATA OF

TRILOY 220HF GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.13
Water Absorption (24 hours at 23℃)	%	D570	0.2
Melt Flow Rate (260℃, 5.0kg)	g/10min	D1238	22

MECHANICAL
Tensile Strength at yield	kgf/cm²	D638	490
Tensile Elongation at break	%	D638	120
Flexural Strength at yield	kgf/cm²	D790	820
Flexural Modulus	kgf/cm²	D790	21,850
Izod Impact Strength, notched, 23℃(1/8")	kgf.cm/cm	D256	55
Rockwell Hardness	M scale	D785	-

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	108

OTHERS
UL-94 Flammability	-	(UL 94)	-
Mold Shrinkage	%	D955	0.5~0.7
※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRILOY 220HF GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	100
Drying Time	hr	3~5
Moisture Content, Max	%	0.02

Melt Temperature	℃	240~270
Nozzle Temperature	℃	240~270
Front Temperature	℃	235~265
Middle Temperature	℃	230~260
Rear Temperature	℃	220~250
Mold Temperature	℃	40~60

Back Pressure	MPa	0.3~0.7
Screw Speed	%	30~60(slow to moerate)
Vent Depth	Mm	0.02~0.08
• General processing conditions for TRILOY 220HF are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.

苏州善德宸信 — 专业塑胶材料方案集成服务商，可为客户提供原厂工程塑料随货资料：物性表（TDS）、安全数据表（SDS/MSDS）、出厂检验报告（COA）、RoHS报告、REACH报告、UL黄卡 等，同时提供材料供应、技术咨询及应用开发支持。如您未找到相关材料的物性表，欢迎直接来电咨询，我们竭诚为您服务。

联系电话：15366296797 | 邮箱： abel.liu@e-sdcx.com