215S韩国三养Samyang PC/ABS TRILOY

产品简介 / Introduction

TRILOY 215S是韩国三养Samyang PC/ABS 系列中的通用级牌号，较好的强度和耐热性，冲击强度高，优秀的成形性，适用于精密部件。苏州善德宸信作为韩国三养工程塑料的授权代理商，可为客户提供TRILOY 225的物性表、材料供应、技术咨询及应用开发支持。

  品牌：韩国三养Samyang
  品名：TRILOY
  品类：PC/ABS
  牌号：215S
  材料特性：抗冲击、耐热、尺寸稳定
  应用领域：家电、汽车和电子电器

TYPICAL DATA OF
TRILOY 215S GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.18
Water Absorption (24 hours at 23℃)	%	D570	-
Melt Flow Rate (250℃, 5.0kg)	g/10min	D1238	22

MECHANICAL
Tensile Strength @Max Load	kgf/cm²	D638	540
Tensile Elongation @Break	%	D638	100
Flexural Strength @Yield	kgf/cm²	D790	900
Flexural Modulus	kgf/cm²	D790	24,000
Izod Impact Strength（Notched 1/8"，R/T)	kgf.cm/cm	D256	65
Rockwell Hardness	R scale	D785	-

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	112

OTHERS
UL-94 Flammability	-	(UL 94)	HB@1.5mm
Mold Shrinkage	%	D955	0.5~0.7
※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRILOY 215S GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	100
Drying Time	hr	4~5
Moisture Content, Max	%	-

Melt Temperature	℃	255~270
Nozzle Temperature	℃	250~270
Front Temperature	℃	250~270
Middle Temperature	℃	240~260
Rear Temperature	℃	220~240
Mold Temperature	℃	50~80

Injection Pressure	MPa	90~150
Injection Speed	%	30~60
Back Pressure	MPa	0.3~0.7
Screw Speed	Rpm	80~100
• General processing conditions for TRILOY 215S are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.