1500G30韩国三养Samyang PBT TRIBIT

产品简介 / Introduction

TRIBIT 1500G30是韩国三养Samyang PBT系列中的玻纤增强级牌号，因其优异的耐化学性、电绝缘性能和快速结晶特性，广泛应用于汽车电子、连接器和精密部件。苏州善德宸信作为韩国三养工程塑料的授权代理商，可为客户提供TRIBIT 1500G30的物性表、材料供应、技术咨询及应用开发支持。

  品牌：韩国三养Samyang
  品名：TRIBIT
  品类：PBT
  牌号：1500G30
  材料特性：30%玻纤增强、耐化学性、电绝缘性能
  应用领域：家电、汽车和电子电器

TYPICAL DATA OF
TRIBIT 1500G30 GRADE

PROPERTY	UNIT	ASTM METHOD	TYPICAL DATA
PHYSICAL
Specific Gravity	-	D792	1.52
Water Absorption (24 hours at 23℃)	%	D570	0.07
Melt Flow Rate (260℃, 5.0kg)	g/10min	D1238	48

MECHANICAL
Tensile Strength	kgf/cm²	D638	1200
Tensile Elongation at break	%	D638	3
Flexural Strength at Yield	kgf/cm²	D790	1800
Flexural Modulus	kgf/cm²	D790	75,000
Izod Impact Strength, notched, 23℃(1/8")	kgf.cm/cm	D256	8
Rockwell Hardness	R scale	D785	120

THERMAL
HDT, 18.6 kgf/cm²	℃	D648	210
Coefficient of Linear Thermal Expansion	㎜/㎜/℃	D696	3 x 10⁻⁵

ELECTRICAL
Volume Resistivity	Ω∙㎝	D257	1×10¹⁶
Dielectric Strength	kV/㎜	D149	25
Dielectric Constant	-	D150	3.2
Dissipation Factor	-	D150	0.02
ARC Resistance	sec	D495	130
OTHERS
UL-94 Flammability (0.84mm thickness)	-	(UL 94)	HB
Mold Shrinkage	%	D955	0.2~0.12
※ The figures listed in this table are typical values obtained under the standard test methods and may not beapplicable for products that are under different application condition.

PROCESSING GUIDE FOR
TRIBIT 1500G30 GRADE

SPECIFICATION	UNIT	CONDITIONS

Drying Temperature	℃	120
Drying Time	hr	3~5
Moisture Content, Max	%	0.02

Melt Temperature	℃	250~270
Nozzle Temperature	℃	250~270
Front Temperature	℃	250~270
Middle Temperature	℃	245~265
Rear Temperature	℃	240~260
Mold Temperature	℃	60~90

Back Pressure	%	< 70
Screw Speed	%	< 60
Injection Pressure	%	< 70
Injection Speed	%	< 50
Hold Pressure	%	< 50
Injection Cushion	Mm	3 ~ 6
• General processing conditions for TRIBIT 1500G30 are shown below. • Drying prior to processing is essential to ensure desired appearance and property performance.